Automatic Measuring Systems > Bearing related measuring machine

Bearing related measuring machine

Inner ring, Outer ring

  • Bearing ball groove shape measuring machine
  • Bearing matching measuring machine
  • Minimum bearing ball matching measuring machine

Bearing assembly

  • Bearing total measuring machine

Needle roller

  • Needle roller outer diameter inspection machine

contact
download

Inner ring, Outer ring

Bearing ball groove shape measuring machine

This machine measures the shape of each ball groove of inner and outer rings.
calculates the R dimensions of the grooves, PV value (maximum and minimum value of shape graph).

Bearing ball groove shape measuring machine
Bearing ball groove shape measuring machine
Bearing ball groove shape measuring machine
Bearing ball groove shape measuring machine

Bearing ball groove shape measuring machine

Bearing matching measuring machine

This machine measures the inner ring groove diameter and put it in the inner ring rotation stocker.
Also, the classified ball was prepared in advance, after measurement of outer ring of groove diameter, select the inner ring and a ball to make optimum clearance.

Bearing matching measuring machineBearing matching measuring machineBearing matching measuring machine

Minimum bearing ball matching measuring machine

This machine is a minimum sized bearing ball matching assembly. The minimum inner diameter can be handled is Φ 1mm. It measures the inner and the outer rings of ball grooves, and set up with the optimum clearance on the basis of the calculation.

Minimum bearing ball matching measuring machine

page top

Bearing assembly

Bearing total measuring machine

This machine measures the various items of completion bearings.
Make discrimination of OK / NG and read automatically the bearing number to make the inspection report.

Bearing total measuring machineBearing total measuring machine

Needle roller

Needle roller outer diameter inspection machine

This measures the outside diameter of the needle roller and makes judgement.
Also it makes correction with the feedback signal from the measurement results.

Needle roller outer diameter inspection machine
Needle roller outer diameter inspection machineNeedle roller outer diameter inspection machine

page top


Copyright © 2013 TOSEI ENGINEERING CORP. ALL RIGHTS RESERVED.
株式会社東精エンジニアリング