Laser Interferometer > DISTAX 300A
Japanese

DISTAX 300A

DISTAX 300A


Machine tool automatic measuring system

contact
download

Specifications

● System

Model L-IM-300A Series(1 interferometer system : L-1M-301A, 2 interferometer system : L-1M-302A)
Measurement range Corner cube type: 10 m Plane mirror type: 5 m
Optical fiber length 3 m, 5 m, 10 m
Resolution Corner cube type: 5 nm Plane mirror type: 2.5 nm
Response speed Corner cube type: 630 mm/s (Special: 1000 mm/s)
Plane mirror type: 315 mm/s (Special: 500 mm/s)
Accuracy ±(L x 0.6 x 10-6 + 5 x 10-9) m
*L = Measuring distance
Number of interferometers 2 Max.

● Software (NC error measurement / ISO standard measurement / Warming up)

Number of measurement points Up to 3 axes, measured sequentially
Connect port to NC RS-232C, Ethernet
Supported NC FANUC 16 / 18 / 21, 0i / 15i / 150i, 16i / 18i / 21i, 30i / 31i / 32i, 160i / 180i / 210i, 300i / 310i / 320i series
Mitsubishi MELDAS 60 / 60S, 700 series
SIEMENS SINUMERIK 840D sl
Measurement / output content Full compliance with ISO 230-2 (1988, 2006)Various positioning accuracy inspection items, including average reversing error
Various graph outputs Formatted inspection report output
Compensation item Pitch error and backlash error.(Automatic correction)
Functions required from NC Programmable parameters (required for automatic correction)
Tape operation mode (required for automatic operation of NC from a PC using G-codes)
(If this mode is not available, the NC can operate in the memory mode and automatic measurement can be performed using data from the DISTAX counter.)

contact
download

pagetop
InquiryInquiry


Copyright © 2013 TOSEI ENGINEERING CORP. ALL RIGHTS RESERVED.
株式会社東精エンジニアリング