Post-process > PULCOM BG100
Japanese

PULCOM BG100

contact
download

Features

Reduction of set-up change working hours with exchangeable guide type bore gage

In the measurement after ID process a guided bore gage for determining the position for inserting a work is used. In the replacement of guides carried out when replacing the steps, it has been generally regarded to be a difficult task requiring experienced skills. The new guided bore gage “BG-100 gage” has dramatically reduced the time for replacing the guide by employing a method in which the replaced parts used for changing the measurement diameter are dubbed and fixed to the reference surface. In addition, a model with retract function that won’t leave the insertion trace of a probe on aluminum work is available.

Application

Outer Appearance / Dimensions Diagram

Specifications

Model BG-100 BG-100-AR
Product code 0948210 0948220
Measurement range Φ 3 to Φ 120
(Less than Φ 10 is Special specifications)
Repeatability ≦ 1.0 μm (4σ)
Linear range -150 to 150 µm
Linearity 0.1 o/o over 1.0 o/o or less than F.S.
Pre travel (One side) 0.15 to 0.2 mm
Measuring force 0.75 N
Number of outputs 1
Diameter and length of the cable Φ 6 x 3 m
Retract function None Exist
Retract air source 0.3 to 0.5 MPa
Weight (Body) Approx. 3.5 kg Approx. 3.8 kg

contact
download

pagetop
InquiryInquiry


Copyright © 2013 TOSEI ENGINEERING CORP. ALL RIGHTS RESERVED.
株式会社東精エンジニアリング