Process Monitoring System > PULCOM GE-10V

PULCOM GE-10V

PULCOM GE-10

PULCOM GE-10V is the additional controller which add the process monitoring function to the in-process gauge system PULCOM V10A. This model has two types, one is a board type inserted in PULCOM V10A, the another is box type connected to PULCOM V10A with cable. This model has two measurement items. AE signal waveform is displayed on the LCD of PULCOM V10A. This model is suitable for the process monitoring.

contact
download

Feature

Display Process Monitor

The optimization of the processing condition helps the analysis of the cause of the defect because the change of AE waves that is generated by the process can be identified very clearly by digital noise reduction of PULCOM GE-10 and GE-10V.

Frequency Analysis Function

Detected AE waves are analyzed by frequency analysis, and power spectrum is displayed in real time.It detects the problem that can not be distinguished by strength level of AE wave.

Combine with In-process Gauge

By using in-process gauge and PULCOM GE-10V to identify the processing status clearly, not only processing dimension but also the most suitable processing load, workpiece roughness, and profile accuracy are improved.

Controller specification table

Name GE-10 GE-10V
Product code 1CH 0936001
2CH 0936002
1CH GAP / CRASH 0936153
1CH 0936005 (0936007*)
2CH 0936006 (0936008*)
1CH GAP / CRASH 0936156 (0936155*)
*V10 build-in
Channel 1 or 2 1 or 2
Display LED Bar graph Key pad V10A
LCD with touch panel
Waveform display
Trigger point 1 (programable) 1 (programable)
Parameter set 1 1
Gain control Manual Manual
I/O simulator Monitor Only
Latch / Free Pin select Pin select
PC software AE-MONITOR
Detection method Acoustic Emittion
Usage environment Temperature 0 to 45℃ Humidity 10 to 90% RH
Waterproof IP54
(front panel only)
Vibration resistance MAX. 4.8 G (X, Y, Z axes)
* According to Accretech measuring standards (JISC60068-2-6 compliant)
Shock resistance MAX. 25 G ( X, Y, Z axes, 10 times each)
Power requirements DC24 V ± 10% 16 W
Analog output Output impedance 1 K Ω
I/O input Photocoupler input max 10 mA
I/O output Open drain output (sink or source) 24 VDC max 40 mA
Weight 1.1 kg 2.0 kg
CE marking Conformity

contact
download

pagetop


Copyright © 2013 TOSEI ENGINEERING CORP. ALL RIGHTS RESERVED.
株式会社東精エンジニアリング