In-process > RF-05A/06A Rear-Fork Gages
  • Japanese

RF-05B/06A/08 Rear-Fork Gage

 

 

Configurations

Stationary Type

Oscillating Type

  • arrowPULCOM V4, V10A with memory function

contact
download

Features

Main spindle through type

Even on internal grinders where the space is limited, a sizing device can be used while still offering free layout.Mounted inside the main spindle, it does not interfere with the grinding wheel, auto-loader or dresser. Moreover, larger grinding wheels can be used even on the tiniest diameters.

Stationary / Oscillating measurements

Two type of measurement methods: A stationary type where the contact remains in the hole during grinding, and an oscillating type where sliding in and out is synchronized with the grinding wheel.

Miniature size RF series

This is a small measurement head which is easy to arrange
inside the spindle.
OD RF-05B: Φ 24.8 mm
RF-06A: Φ 15.9 mm
RF-08: Φ 15 mm

 

 

Overview

RF-08

RF-06A

 

RF-05B

 

contact
download

Specifications

Model RF-05B RF-06A RF-08
Measured diameter Φ 10.0 to 60.0 mm Φ 2.0 to 10.0 mm Φ 2.0 to 10.0 mm
Measuring force 0.7±0.2 N 0.6±0.1 N
Repeatability 0.5 μm/25 times 0.2 μm (4 σ)
Pre travel 0.06 to 0.08 mm 0.055 to 0.075 mm
Linear range -200 to +100 μm -200 to +50 μm
Number of output 2
Diameter and Length
of a Cable
Φ 6 x 5 m Φ 6 x 3 m
Weight (Body) Approx. 0.3 kg Approx. 0.1 kg Approx. 0.07 kg

pagetop

InquiryInquiry

Copyright © 2013 TOSEI ENGINEERING CORP. ALL RIGHTS RESERVED.
株式会社東精エンジニアリング