Air micrometers > Head for simultaneous and multiple measuring items
  • Japanese

Head for simultaneous and multiple measuring items

With one head we can measure different items at the same time.
The head can be designed for the customer requirements.

Examples of measuring head

4M PISTON I.D./Squareness/Concentricity measurement
Measurement item
…………………………………………………………………………………
I.D. measurement (2 sections)
Measures the I.D. of the 2 sections only inserting
vertically with installed nozzles.
…………………………………………………………………………………
Concentricity measurement
Measures the squareness by stepped nozzle.
(Rotate the workpiece180°)
…………………………………………………………………………………
I.D. measurement (2 sections)
Measures the concentricity by measuring
the wall thickness.
(Rotating the workpiece one revolution.)
…………………………………………………………………………………

4M PISTON eight measurement
Measurement item
…………………………………………………………………………………
Height measurement(4 point)
Measures the height of workpiece by
vertically installed nozzles. It can be
measured by simply placing the
workpiece on stand.
…………………………………………………………………………………

5M CYL Groove width measurement
Measurement item
…………………………………………………………………………………
Width measurement (5 points)
Measures the width of workpiece through the
nozzles installed on both sides of the
plate-shaped head. It can be measured
the width of 5 points by just pluging the
workpiece on the plate-shaped head.
…………………………………………………………………………………
pagetop

4M Shaft O.D. measurement
Measurement item
…………………………………………………………………………………
O.D. measurement (4 points)
Measuring the O.D. of the workpiece by
air blow nozzles on both sides.
It can be measured the O.D. of 4 points
by simply placing the workpiece in the
head of V stand.
…………………………………………………………………………………

Cylinder I.D./Squareness/Cylindricality measurement
Measurement item
…………………………………………………………………………………
I.D. (2sections), Cylindricality measurement
Measures the I.D. (2sections) and cylindricality
only inserting vertically with installed nozzles.
…………………………………………………………………………………
Squareness measurement
Measures the squareness by stepped nozzle.
It can be measured by simply placing without
rotating the workpiece, because the nozzles
are installed in two places.
…………………………………………………………………………………

Cylinder core between the measurement
Measurement item
…………………………………………………………………………………
Measurement of distance between cores
Measures distance between cores of
the workpiece.
It can be measured by simply inserting
the workpiece.
…………………………………………………………………………………

Rotor groove width measurement
Measurement item
…………………………………………………………………………………
Width measurement
Measures the width of workpiece through
the nozzles installed on both sides of
the plate-shaped head.
It can be measured by just pluging the
workpiece on the plate-shaped head.
…………………………………………………………………………………

Bearing flatness measurement
Measurement item
…………………………………………………………………………………
Flatness measurement
Measuring the flatness of workpiece
by five nozzles.
It can be measured by simply placing
the workpiece in the head.
…………………………………………………………………………………

contact
download
pagetop
InquiryInquiry

Copyright © 2013 TOSEI ENGINEERING CORP. ALL RIGHTS RESERVED.
株式会社東精エンジニアリング